Hsyv UTP CAT6 Network Cable
|FOB Unit Price:||US $0.2 US $0.15|
|Purchase Qty. (Meters)||FOB Unit Price|
|Payment Terms:||L/C, T/T|
- Model NO.: 010134
- Conductor Material: BC/CCS/CCA/TC/CU/CCAG
- Type: Cat 6
- Conductor Type: Stranded
- Certification: CE, ISO, RoHS, CCC
- Brand: Gemt
- Transport Package: 100M/ROLL
- Origin: Guangdong China
- Application: LAN Cable
- Cover Material: PVC
- Material Shape: Flat Wire
- Wire Core Material: Bare Copper Wire
- Model: MHYV-xx
- Trademark: GEMT
- Specification: IEC Standard
- HS Code: 85441100
1. Cable Introduction:
1) Standard: IEC245-81/82
2) Conductor: Flexible bare copper or CCA
3) Insulation: Polyvinyl Chloride (PVC) or Rubber
4) Rated Voltage: 450/750V, 600/1000V
5) Rated Temperature: -20oC~+70oC
6) Application: Welding Cable is used for connection from electrode holder and clamp to arc welder, bus, welding box or transformer. May also be used in automotive applications where high flexibility and superior abrasion and chemical resistance is required.
|Class:||Network cable,signal cable|
|Structure Inner Conductor O.F.C Bare copper 0.60mmBC InsulationHDPE Φ1.0mm Plastic (PE) cross to isolate shielded pairs, Jacket: Flame retardant PVC, yellow, Nom O.D.: Φ6.50mm StandardYD/T 1019-2001 Application: The horizontal twisted pair cable for digital communication application, is mainly used for the wiring between telecom lead-outs and floor distributor comprehensive system, as well as the wiring between the user telecom lead-outs and floor distributor comprehensive system. It meets high speed LAN and requirements of 250MHz channel width. Its cross lead design has enhanced NEXT and impedance performance, and increased band width and signal-to-noise ratio margin. With standard wiring length 90m,it is connected in T568A or T568B manner, sharing Cat.5e fittings. Coded according to ANSI/TIA/EIA-568-B color code Specifically applicable to following systems: All UTP Ethernet protocols of 4.8Gbps,e.g:1000BASE-T,1000BASE-TX,100BASE-T2,10BASE-T All protocols of 4.8Gbps and UTP-based ATM 100Mbps-PMD|
Broad-band video (77 channels below 550MHz)
Inner Conductor O.F.C Bare copper Solid 0.52mmBC
Shielding: Aluminum Foil + Tinned Copper drain wire(0.50mm TC)
Jacket: Flame retardant Grey PVC Nom O.D.: Φ6.30mm
2)Inner packing: Wooden reel, Plastic reel, Paper reel available
3)Outer packing: Carton box, Pull out box, Pallet available
4)Outer box brands, jacket colors, conductor material as customers requirement.
4. The advantages of our company:
1) Our company is a professional supplier of various kinds of cables for over 10 years.
2) The quality of our products are guaranteed. They are all with CCC, CE, CB and RoHS certificates.
3) The price is averagely 10%~20% lower than the other competitors. Because our factory is located in a small town. The labor and raw materials cost are relatively low there.
4) Huge Inventory Allows Us To Ship Your Order Immediately
5) Our employees are all capable and professinal. They can offer you the Prompt Courteous Service.
6) We ship worldwide.
The horizontal twisted shield pair cable for digital communication application, is mainly used for the wiring between telecom lead-outs of work area and floor disturbance comprehensive system, as well as the wiring between the user telecom lead-outs and floor distributor comprehensive system, it meets the requirements of 100MHz data communication.
Its shield protection allows it to avoid error codes caused by environmental disturbance in transmittance. It applies to high electromagnetic disturbance environment such as hospital, telecom room, airports. With standard wiring length 90m,it is connected in T568A or T568B manner. The end employs shield and grounded parts, so as to ensure Channel to transmit normally under shield protection.
Coded according to ANSI/TIA/EIA-568-B color code
Specifically applicable to following systems:
100Mbps Ethernet100BASE-Tand other systems below 622Mbps
4Mbps and 16Mbps Token Ring Network
Q: Can I have a sample?
A: Yes, we welcome sample order to test and check quality.
Mixed samples are acceptable.
Q: How long is the lead time?
A: Sample needs 1-2 days; mass production needs 15-30 days.
Q: Do you have the MOQ limit?
A: Our MOQ is 100-10000meters, depending on the products;
Sea Port: FOB Shenzhen.
Q: Do you provide OEM or ODM services?
A: Yes, we do.
Q: Do you offer guarantee for the products?
A: Yes, we offer five years guarantee for the products.
7. Company Information:
Packing & Shipping:
WARMLY WELCOME TO VISIT TO OUR FACTORY AND SHOWROOM , AND KNOW MORE ABOUT US ~~~~
PLS FEEL FREE TO
CONTACT ME : VERA ZHUANG